We all know that the electric permanent magnet chuck industry is developing very rapidly. We are now using more and more electric permanent magnet chucks. Since the industry is still developing, it should be noted that there are many problems that should be paid attention to in the use of the commonly used electric permanent magnet chuck. Let us understand together:
1. Inspection: Check the parts and components of each part before each operation and replace them if damaged.
2. Balance problem: Pay attention to balance, place the electric permanent magnet suction cup above the center of gravity of the product, and then energize it to prevent light iron filings from flying.
3. Magnetic problem: Before lifting, please pay attention to metal objects, and the electric permanent magnet chuck must not have non-magnetic objects, such as plastic, wood, stone, etc. so as not to affect work efficiency.
4. Current problem: Before lifting, check the current to see if the working current can reach the rated value, and then start lifting.
5. Safety matters: During the lifting process, special attention should be paid to safety matters. Personnel is prohibited from passing through the equipment within the specified range.
6. Pay attention to balance, the electric permanent magnet suction cup should be placed above the center of gravity of the product, and then energized to prevent light iron filings from flying.
7. Before the electric permanent magnet chuck is lifted, the working current should reach the rated value.
8. When landing, please pay attention to your surroundings to avoid injury.
9. When lifting, please note that there should be no non-magnetic objects between the metal product and the permanent magnet chuck. Such as sawdust, sand, etc. Otherwise, the lifting capacity will be affected.
