RCT Magnetic Pulley Conveyor Description

Magnetic Pulleys provide continuous protection against Tramp Iron contamination of both large tramp iron and fine metal particles.

RCT series magnetic roller is composed of the magnetic class block, stainless steel tube, Cylinder cover, bearing, and magnetic core.RCT series permanent magnet drum (half magnetic roller, magnetic roller is mainly used in building materials, chemical, coal, metallurgical, and other industries. This equipment with DT a type belt conveyor, TD75 belt conveyor, instead of an active or passive wheel, can separate automatically ferromagnetic material from magnetic materials of the conveyor belt, When conveying material accumulation is very thick, a permanent magnetic pulley can be used with hanging iron remover to achieve the goal of completely iron. Its internal magnetic system adopts high-performance hard magnetic material composition, It has a series of advantages, such as high magnetic field intensity, simple structure, convenience, ease of maintenance, energy saving, etc. It is widely used in cement, magnetic separation, mining, steel, chemicals, refractories, waste disposal industries, etc.

RCT

RCT Magnetic Pulley Conveyor Features

1. Used in the recycling, powder/bulk, mining, and quarries for separation of tramp iron.

2. They can be used as drive head pulleys or tail pulleys on belt conveyors. They provide maximum, continuous protection against tramp iron contamination, for downstream machinery and product purification of processed materials.

3. These easily installed units provide permanent magnetic strength and require no maintenance. Magnetics are Permanent ceramic, but there are instances, where having to alternate conveying material that is magnetic but should not be separated, requires an electro-magnetic pulley. These too are available.

4. Pulleys are available in diameters of 4", 6", 8", 10", 12", 14", 15", 16", 18", 20", 24", 30", 36", 42" and 48". The width of the pulley, shaft diameter, and length are based on the customer's requirements.

5. Shafts are normally welded on 4", 6", 8", and 10" models, but can be fitted with hubs and bushings of choice as an option. All other sizes, XT Hubs, and Bushings are standard. Other types of hubs are optional.

RCT Magnetic Pulley Conveyor Products Parameters

Model	Magnetic induction intensity of the drum surface (GS)	Material Depth (≤mm)	Drum diameter (mm)	Drum length(mm)	Belt speed (≤ m/s)	Appearance size (mm)
Model	Magnetic induction intensity of the drum surface (GS)	Material Depth (≤mm)	Drum diameter (mm)	Drum length(mm)	Belt speed (≤ m/s)	A	B	D	L	L1	k	d	h	b
RCT-32/40	1500-3000	40	320	400	2.5	728	400	320	500	930	100	45	48.5	14
RCT-32/50	1500-3000	40		500		850	500	320	600	1030	100	50	53.5	14
RCT-32/65	1500-3000	40		650		1000	650	320	750	1280	115	65	69	18
RCT-40/50	1500-3500	60	400	500		850	500	400	600	1097	115	55	60	16
RCT-40/65	1500-3500	60	400	650		1000	650	400	750	1280	135	65	69	18
RCT-50/50	1500-3800	70	500	500		850	500	500	600	1097	115	55	60	16
RCT-50/65	1500-3800	70		650		1000	650	500	750	1280	135	70	76	20
RCT-50/80	1500-3800	70		800		1300	800	500	950	1580	135	70	76	20
RCT-65/80	1500-4000	80	650	800		1300	800	650	950	1661	175	70	76	20
RCT-65/100	1500-4000	80		1000		1500	1000	650	1150	1860	175	90	97	24
RCT-65/120	1500-4000	80		1200		1750	1200	650	1400	2195	215	110	119	32
RCT-80/80	1500-4200	100	800	800		1300	800	800	950	1661	175	90	76	24
RCT-80/100	1500-4200	100	800	1000		1500	1000	800	1150	1954	215	90	97	24
RCT-100/120	1500-4500	120	1000	1200		1750	1200	1000	1400	2270	255	110	119	32
RCT-100/140	1500-4500	120	1000	1400		2000	1400	1000	1600	2446	255	110	119	32

To power, granular and bulk materials or to reclaim the iron impurities to protect the crusher, grinder, and presser from ruining, It can also be used for the roughing separation and concentration of the low-grade magnetic minerals.