Lifting Anchor

Lifting Anchor Introduction

The lifting Anchor is hot forged from Manganese steel. The former head provides spherical seating that the Lifting Eye engages, while a disc-shaped foot is embedded in the concrete. Due to its being a forged part, the Swift Lift Anchor does not depend on welds or thread engagement to develop its safe working load. Forging provides maximum safety with its advantageous material structure. This allows the anchor to easily meet the OSHA requirement of a 4:1 factor of safety. We currently have to lift anchors in various styles and weights, and the factory-direct sales price is competitive

Lifting anchors, Clutches, and accessories make lifting concrete components easy, efficient, and safer during transportation, rigging, and lifting of precast concrete elements. Pin Lifting Anchor

The Lifting anchors system utilizes a fully engineered approach combining cast-in lifting anchors, recess formers, and custom-fitting lifting clutches. Using the Lifting anchors system results in fewer failures, saving time and costs due to damage or construction delays.

Lifting Anchor is the most versatile and widely used anchor in the Lifting Anchor range. Available in a wide range of Working Load Limits (WLL), all Lifting anchors comply with AS 3850.1:2015. Consistent with Reid's commitment to local testing, Lifting Anchor has been extensively tested in concrete, comprising over 500 individual tests and consuming approximately 150 tons of concrete.

The anchor may only be used in combination with the mentioned GME lifting devices.

Spherical head anchors are designed for the transport of precast concrete units only. Multiple uses within the transport chain(from production to installation of the unit) mean no repeated usage. This Installation and Application Instruction does not specify repeated usage (e.g., ballasts for cranes) or a permanent fixation.

 

Production Equipment and Process

What sets us apart from our competitors is our ideal magnetic solution, excellent quality, and great service.

With a testing laboratory equipped with state-of-the-art measuring and testing devices, our QC dept. ensures ongoing development and maintenance of high-quality standards and guarantees full compliance with customer requirements and all applicable regulations.

(production equipment and process as below)

From the production of parts to the final product, the process requires steps. (The specific production process depends on different equipment capabilities)

To ensure the quality, we would conduct a strict quality check against the industry standard. A special quality inspector is responsible for inspecting each process.

Past Project

 

US Standard Lifting Anchor

Lifting anchors are crafted from high-strength steel and feature forged ends for enhanced durability. The specially designed lifting head ensures even load distribution when engaged with a Lifting Clutch or Lifting Eye, while the oversized forged anchor foot is securely embedded in concrete to deliver optimal load-bearing capacity. These anchors are engineered to comply with OSHA standards, including a 4:1 Safety Factor for added reliability. The standard protective finish is hot-dip galvanizing for superior corrosion resistance.

Code	Ton	Length	Weight Per Piece (lbs)	1500 PSI (lbs)	2500 PSI (lbs)	3500 PSI (lbs)	5000 PSI (lbs)	Min. Edge Tension	Min. Edge Shear
LA1T-238L	1T	2-3/8"	0.13	1,045	1,350	1,600	1,910	8"	12"
LA1T-258L	1T	2-5/8"	0.14	1,160	1,500	1,770	2,000	9"	12"
LA1T-338L	1T	3-3/8"	0.16	1,900	2,000	2,000	2,000	8"	12"
LA1T-434L	1T	4-3/4"	0.21	2,000	2,000	2,000	2,000	10"	12"
LA2T-234L	2T	2-3/4"	0.32	1,375	1,775	2,100	2,510	8"	12"
LA2T-338L	2T	3-3/8"	0.35	2,000	2,700	3,250	3,900	8"	12"
LA2T-434L	2T	4-3/4"	0.45	3,250	4,000	4,000	4,000	10"	15"
LA2T-512L	2T	5-1/2"	0.48	4,000	4,000	4,000	4,000	11"	17"
LA2T-634L	2T	6-3/4"	0.58	4,000	4,000	4,000	4,000	11"	17"
LA2T-11L	2T	11"	0.85	4,000	4,000	4,000	4,000	11"	17"
LA4T-212L	4T	2-1/2"	0.64	1,400	1,810	2,150	2,560	8"	12"
LAT-3L	4T	3"	0.73	1,960	2,530	2,990	3,570	8"	12"
LA4T-312L	4T	3-1/2"	0.82	2,275	2,935	3,475	4,150	8"	12"
LA41334L	4T	3-3/4"	0.85	2,550	3,250	3,950	4,700	8"	12"
LA4T-414L	4T	4-1/4"	0.91	3,000	3,850	4,550	5,450	9"	13"
LA4T-434L	4T	4-3/4"	0.98	3,650	4,700	5,600	6,700	10"	15"
LA4T-512L	4T	5-1/2"	1.08	4,550	5,850	6,950	8,000	11"	17"
LA4T-718L	4T	7-1/8"	1.32	6,900	8,000	8,000	8,000	15"	22"
LA4T-912L	4T	9-1/2"	1.6	8,000	8,000	8,000	8,000	17"	28"
LA8T-434L	8T	4-3/4"	2.15	4,050	5,200	6,200	7,450	10"	15"
LA8T-634L	8T	6-3/4"	2.5	7,000	9,000	10,750	12,850	14"	21"
LA8T-834L	8T	8-3/4"	3.03	12,940	16,000	16,000	16,000	18"	27"
LA8T-10L	8T	10"	3.4	14,790	16,000	16,000	16,000	20"	30"
LA8T-1338L	8T	13-3/8"	4.25	16,000	16,000	16,000	16,000	27"	41"
LA8T-2634L	8T	26-3/4"	7.9	16,000	16,000	16,000	16,000	27"	41"
LA16T-778L	16T	7-7/8"	6.6	7,000	9,000	10,750	12,850	14"	21"
LA20T-10L	20T	10"	8.25	11,750	15,150	17,950	21,500	20"	30"
LA20T-1934L	20T	19-3/4"	13.5	26,000	33,800	40,000	40,000	40"	48"

The table is based on normal-weight concrete (145-150PCF)

The minimum anchor spacing is 2x the published edge distance.

Minimal reinforcement is required to achieve above-load values

Capacities in radius sections are reduced - consult GME

The above capacities are based on mechanical testing, concrete testing, and available

Loads are listed at varying concrete strengths (PSl) to accommodate varying conditions at the time of loading.

Proper rigging and all lifting angle load magnifications are to be used to determine actual applied loads.

To achieve published values, a minimum concrete cover of 1" below the foot of the anchor is required.

For insulated wall panel and slab applications, the foot of the anchor can sit on or be recessed by the depth of the foot into the insulation, as long as full concrete bearing on the top of the foot is achieved industry data.

For the lifting and handling of thin slabs, the design needs to ensure the slab is properly reinforced to prevent flexural stresses from cracking the slab.

 

Lifting Anchor Primary Competitive Advantages

1. More than 10 years, 4 years of focus on building material manufacturing
2. GME's products are enhanced by the factory QA and quality control checks during production. If necessary, each order can be sent out with a certificate referring back to the test
3. OEM/ODOM capability: more than 10 years of experience
Easy installation due to the rotational symmetry, optimized for automated anchor feeding.
5. Quick coupling of the lifting device to the anchor.
6. Robust, long-lasting lifting device.

 

Past Product List

Lifting Anchor

Code	Load group	L	D	D1	D2	S	R	Ar
	T	mm	mm	mm	mm	mm	mm	mm
LA1.3-120	1.3	120	10	19	25	10	30	390
LA1.3-240	1.3	120	10	19	25	10	30	390
LA2-190	2	190	14	26	35	11	37	450
LA2-280	2	280	14	26	35	11	37	450
LA2.5-170	2.5	170	14	26	35	11	37	540
LA2.5-280	2.5	280	14	26	35	11	37	540
LA4-210	4	210	18	36	45	15	47	675
LA4-240	4	240	18	36	45	15	47	675
LA4-340	4	340	18	36	45	15	47	675
LA4-420	4	420	18	36	45	15	47	675
LA5-240	5	240	20	36	45	15	47	765
LA5-340	5	340	20	36	45	15	47	765
LA5-480	5	480	20	36	45	15	47	765
LA7.5-300	7.5	300	24	46	60	15	59	945
LA7.5-540	7.5	540	24	46	60	15	59	945
LA7.5-680	7.5	680	24	46	60	15	59	945
LA10-340	10	340	28	46	70	15	59	1100
LA10-680	10	680	28	46	70	15	59	1100
LA15-400	15	400	34	69	98	15	80	1250
LA20-500	20	500	38	69	98	15	80	1550
LA20-1000	20	1000	38	69	98	15	80	1550
LA32-700	32	700	50	88	135	23	107	2150
LA32-1200	32	1200	50	88	135	23	107	21

Double-Head Lifting Anchor

Code	Rated Load	Sizes (mm)			Popular Length
	Tons	D	D1	D2	(mm)
DA-1.3	1.3	10	19	25	50	55	65	85	100	120
DA-2.5	2.5	14	26	35	65	85	110	120	140	170
DA-5.0	5.0	20	36	50	95	120	140	170	180	210

Easy Lift Utility Anchor

Code	Size	Tensile Load	Dimensions (Inch)			Slab Thickness
		SWL(LBS)	H	L	D	Inch
ELUA-12V-1200	12V	1200	3-1/8	5.28	0.45	4
ELUA-12V-3000		3000	3-3/4	6		4-1/2
ELUA-12V-4000		4000	4-3/4	7.12		5-1/2
ELUA-12V-5000		5000	6-3/4	9.38		8
ELUA-17V-2000	17V	2000	3-1/8	5.3	0.67	4
ELUA-17V-4000		4000	3-3/4	6.8		4-1/2
ELUA-17V-6000		6000	4-3/4	7.4		5-1/2
ELUA-17V-10000		10000	6-3/4	10		8

Plate Anchor

Code	Rated Load	Popular Length (L)			Axb
	Tons	mm			mm
PA-2.5	2.5	55	120		70x70
PA-5.0	5.0	55	65	110	90*90
PA-10.0	10.0	115			90*90

Straight Rebar Anchor

Code	Rated Load	Popular Length
	Tons	L (mm)
SRA-2.5	2.5	400	520
SRA-4.0	4.0	510	720	1150
SRA-5.0	5.0	580	900
SRA-7.5	7.5	750	1150
SRA-10.0	10.0	870	1300
SRA-15.0	15.0	1080	1550

Offset Lifting Anchor

Code	Rated Load	Sizes (mm)
	Tons	D	D1	D2	L
OSLA-1.3-227	1.3	10	19	25	227
OSLA-2.5-268	2.5	14	26	35	268
OSLA-4.0-406	4.0	18	36	45	406
OSLA-5.0-466	5.0	20	36	50	466
OSLA-7.5-664	7.5	24	46	60	664
OSLA-10.0-667	10.0	28	46	70	667
OSLA-15.0-825	15.0	34	69	85	825
OSLA-20.0-986	20.0	38	69	98	986

Eye Anchor

Code	Rated Load	Sizes (mm)
	Tons	D	D1	L	S
EA-1.3-65	1.3	10	19	65	8
EA-2.5-90	2.5	14	26	90	10
EA-5.0-120	5.0	20	36	120	14
EA-10.0-180	10.0	28	46	180	20
EA-20.0-250	20.0	38	69	250	28

Safety Factor is 3:1. Other different Lengths and load capacities are available upon request.

Stainless Steel 304 (A2) / 316 (A4) / 20Mn2Aare available upon request

Specification: 1.3T, 2.5T, 4T, 5T, 7.5T, 10T, 15T, 20T, 32T

Surface: Original Color. Zinc Plating. Hot Dip Galvanized

 

Market

GME's business scope covers Australia, Canada, the United States, Thailand, and other countries. With the continuous expansion of our customer base and production capacity. GME can provide project design and manufacturing services to customers 12 hours a day.

 

Spherical Head T Anchor Testing Report

 

Application Picture

 

Quality Management System

In May 2014, our factory passed Quality Management System TS16949, and in October, our factory passed ISO14001, ISO9001, and GB/28001.

Our factory performs process management based on customer orientation, emphasizing process control, quality cost management, and reducing waste. We also use the Advanced Product Quality Planning (APQP), Potential Failure Mode and Effects Analysis (FMEA), Statistical Process Control (SPEC), Production Part Approval Process (PPAP), Measurement System Analysis (MAS) Error Proofing method to prevent defects from happening.

5R Management Material Procurement System

Our purchasing manager has more than 7 years of purchasing experience and is rich in experience in quality control and the advantages of different factories, different products, and different quality levels.

Criteria for Anchor Selection

The maximum load capacity, edge distance, and mounting values can be found in the corresponding tables. No matter which type of anchor is selected (based on the load acting on the anchor), the following factors must be considered:

● weight of performers

● number of anchors

● anchor layout

● Number of load-bearing anchors

● the opening angle in the hoist

● Anchor diagonal pull characteristics

● dynamic load

● Adhesion to formwork if the slab is cast horizontally and then lifted upright without a tilt table, ensure adequate reinforcement

Number of Anchors

The number of anchors determines the type of hoist to be used. A hoist with more than two cables is statically uncertain if the anchors are aligned along a single axis. A hoist with more than three cables is considered to be statically uncertain if no measures are taken to ensure that the load is distributed between all anchors (e.g., using extension beams, etc.).

Load Capacity

The load capacity of the anchor depends on:

● concrete compression strength foci at time of lift (cube-test 15 × 15 × 15 cm)

● Anchorage length of the anchor

● edge and axial anchor spacing

● load direction

● reinforcement layout

 

Relative Project (with)

In September 2019, GME participated in the Thailand precast concrete exhibition and successfully concluded the exhibition.

After the exhibition, we went to the customer's factory to learn and provide solutions for customers.

 

Production Workshop

 

Comprehensive Labs

 

Lifting Foot Anchor Packaging

The quality of product packaging directly affects the quality of the product. Therefore, we have established a strict packaging management system:

strict responsibility system

inspection system for packaging quality

scientific control statistical method

Packing details, by sea

Wood Carton+ woven bag+ Iron belt

1. Reliable protection of goods and no customer complaints in 7 years.

2. Create conditions for the mechanization and automation of loading and unloading.

3. Reduce packaging size and reduce transportation costs.

4. Save packaging costs.

5. To facilitate the inventory of goods.

6. Promote packaging standardization.

7. To reduce storage costs.

8. Moisture-proof

Packing List As Below

 

Why Choose Us?

1. An Asian reliable supplier from China, we have served numerous clients all over the world. We have been working with our customers for fifteen years. We have a comprehensive set of services, sales, and after-sales services.

2. We have all the popular designs; Small order is accepted and competitive prices.

3. Our team will inspect and test goods very carefully when we know the material trend and know the market

4. All inquiries are responded to within 12 hours. Close to the port, providing great advantages to trade

5. What are your payment terms? For other payment terms, we can negotiate them depending on specific order details.

6. After the product enters the freight forwarding warehouse:

●Our salesman confirms that the bill of lading is correct and informs the customer of the sailing date and arrival date.

●Provide customs clearance information such as invoices, packing data, BL, Form-I, and CO, pictures of products entering the warehouse, etc.

●Or provides a one-stop DDP service for customs clearance.

Hot Tags: Spherical Head Anchor Lifting Anchor, Lifting Anchor manufacturers, suppliers, factory, wholesale, lifting eye anchor, dogbone lifting clutch, cast in lifting eyes for concrete, concrete lifting anchors, ring clutch lifting device, lifting ring clutch.