The magnetic force is produced by high energy material，no time limit，no
energy consumption，no heat，environmental protection，simple and practical
operation.
Super absorbent，the magnetic force can be
superimposed，and it can be increased by the increase of the contact area
of the workpiece，which can be used for force milling and cutting.
The strong suction panel is rigid and stable，and it can be machined in the process without heat and distortion.
Simple
mechanical switch that does not require a power supply to prevent the
loss of the magnetic force from a sudden power failure.
It can easily
replace the workpiece，shorten the workpiece to adjust the working
hours，realize the five-sided processing，and greatly increase the
efficiency of the work by 80%. 
Specification of Fine Pole Permanent Magnetic Chuck For Surface Grinder
Model | Dimension(mm) | N.W | |||||||
A | B | B1 | C | F | G | G1 | H | ||
GMEPM 100X175 | 100 | 175 | 192 | 20 | 1.5(0.5+1) | 55 | 43 | 150 | 7 |
GMEPM 125X250 | 125 | 250 | 270 | 20 | 1.5(0.5+1) | 55 | 43 | 200 | 13 |
GMEPM 150X150 | 150 | 300 | 320 | 20 | 1.5(0.5+1) | 55 | 43 | 150 | 9.4 |
GMEPM 150X300 | 150 | 300 | 320 | 20 | 1.5(0.5+1) | 55 | 43 | 200 | 19 |
GMEPM 150X350 | 150 | 350 | 370 | 20 | 1.5(0.5+1) | 55 | 43 | 200 | 22 |
GMEPM 150X400 | 150 | 400 | 420 | 20 | 1.5(0.5+1) | 55 | 43 | 250 | 26 |
GMEPM 200X400 | 150 | 400 | 420 | 20 | 1.5(0.5+1) | 55 | 43 | 250 | 29 |
GMEPM 200X450 | 200 | 450 | 470 | 20 | 1.5(0.5+1) | 55 | 43 | 250 | 35 |
Note: This table shows the common specification. Optional for any special specification.
Packing of Magnetic Grinding Machine:
Process of Magnetic Grinding Machine: 
Hot Tags: magnetic chuck for cnc milling machine, manufacturers, suppliers, factory
