GME permanent magnet chuck is suitable for various plane of grinder, single angle precision grinding EDM machines . Process after special treatment, so that the adjustment is higher accuracy. Selecting high quality materials, strong suction, small remanence, magnetic uniform distribution. The accuracy of the magnetic surface is unchanged when switch on / off . The arrangement of the magnetic poles is only 1.55mm, which can suck smaller parts.
Features:
1. Applicable to grinding machines, EDM EDM, line cutting, tapping machines, bench drill and other processing.
2. Magnetic pole gap fine, uniform magnetic force, small workpiece processing, the effect is particularly evident.
3. Internal special design, can extend the service life.
4. The main structure is stable, high precision.
5. With industrial pure iron test, the vertical tension up to 100N/cm2.
6. Tungsten steel, hard alloy steel and other magnetic small workpieces are not suitable for magnetic sucker.
| Modle | Size (mm) | Magnetic block (pcs) | Magnetic force block (KGF) | Total suction (KGF) | ||
| A | B | H | ||||
| 2025B | 200 | 256 | 50 | 56 | 25 | 1400 |
| 2025A | 253 | 252 | 90 | 90 | 2250 | |
| 2040A | 200 | 400 | 80 | 136 | 3400 | |
| 3030A | 300 | 300 | 90 | 132 | 3300 | |
| 3040A | 300 | 400 | 90 | 176 | 4400 | |
| 3040B | 293 | 376 | 60 | 132 | 3300 | |
| 30100A | 300 | 1000 | 90 | 352 | 8800 | |
| 3060A | 300 | 600 | 90 | 275 | 6875 | |
| 3535A | 350 | 350 | 90 | 183 | 4575 | |
| 4040A | 400 | 400 | 90 | 240 | 6000 | |
| 4050A | 400 | 500 | 90 | 300 | 7500 | |
| 4060A | 400 | 600 | 90 | 375 | 9375 | |
Hot Tags: high precision magnet sucker chuck with long service life, manufacturers, suppliers, factory
