Permanent magnetic iron separator encyclopedia
Permanent magnet separators employ high coercive force and high remanence special permanent magnets such as "Neodymium-Iron-Boron" to compose composite magnetic systems. With maintenance-free, strong magnetic force, long life, easy installation, easy to use, reliable operation and so on. It is suitable for removing iron from non-magnetic materials on belt conveyors, vibratory conveyors, electromagnetic vibrating feeders and chutes. Remove 0.1-35 kg of ferromagnetic material, the internal permanent magnetic system service life of more than 10 years. When the permanent magnets absorb a large amount of ferromagnetic materials, they are manually removed with a non-magnetic scraper or removed with gloves. This is suitable for applications where continuous operation and less iron are involved.
RCYA Series Pipe Permanent Magnet Remover
RCYA1, RCYA2 series of pipeline permanent magnet separator includes non-magnetic pipe and permanent magnet in two parts, dedicated to the removal of non-magnetic materials in the closed pipe of iron, permanent magnetic separator using high-performance hard magnetic materials to form a composite magnetic system. It has the characteristics of small size, large magnetic force, light weight, clean iron removal, convenience, no energy consumption and long service life.
RCYP manual permanent magnet remover
The conveyor belt is narrow, the material is thin, and there is less misc. The machine is simple in structure, reliable in operation, economical and practical, maintenance-free and without any noise. When the ferromagnetic debris adsorbed on the magnet bottom accumulates to a certain degree, the handle is manually shaken to drive the scraper to remove the scrap iron.
RCYD series permanent magnet dumper
RCYD (C) series permanent magnet dumper is composed of high-performance permanent magnetic core, abandoned iron belt, deceleration motor, frame, roller and other parts. It is used with various conveyors. Used to automatically remove 0.1-35 kg of ferromagnetic material from non-magnetic material. Its internal magnetic circuit adopts computer simulation design and a perfect double magnetic pole structure to ensure the long-term operation of the whole machine in fault-free environments.
RCYSC Series Groove Permanent Magnet Remover
RCY-Q light permanent magnetic strip separator
RCYT series cylinder permanent magnetic separator
Grid separator
RCYB Series Permanent Magnet Remover
RCYF Series Permanent Magnet Iron Remover
RCYZ vibratory dry powder iron remover
RCYC-T series strong suspension self-dumping permanent magnetic separator
Conditions of Use
1, the altitude is not more than 4,000 meters;
2, the ambient air temperature is not higher than +40 °C, not lower than -20 °C;
3, in the environment without explosion danger and without corrosive gas;
4, the temperature at 25 °C, the relative humidity of the surrounding environment is not greater than 90%;
5, indoor and outdoor can be used.
Structural features
The permanent magnetic iron remover consists of two parts: non-magnetic pipe and permanent magnet. It is used to remove iron from the non-magnetic material in the closed pipe. The permanent magnetic iron remover uses a high-performance rare earth magnetic material to compose the composite magnetic system. It has the characteristics of small size, large magnetic force, light weight, clean iron removal, convenience, no energy consumption and long service life. Suitable for applications where no conveyor belts are available and only chutes can be provided. When the bulk material passes through the pipeline-type permanent magnet separator, the iron debris is adsorbed by the high-strength permanent magnets. When the iron impurities are removed, the dedicated gate is opened to remove the impurities.
Permanent magnet iron remover is suitable for occasions with less iron content, and where the iron content is more, dumper iron remover should be used. Mainly used in cement, chemical, coal, plastics, refractories, building materials, paper and other industries in the removal of iron and debris.
