Application And Advantages Of Diametrically Magnetised Ring Magnets in Motors

Jan 11, 2022

Leave a message

For a radial ring magnet, the magnetic pole direction is radial from the center to the periphery, and its magnetic pole position and number of magnetic pole pairs depend on the magnetization method. There are also many magnetization methods. According to the magnetization method, it can be divided into the unipolar magnet, multi-stage magnet, direct pulse magnet, and oblique magnet. The final magnetizing fixture determines the number of magnetizing poles and the inclination angle.

Radial ring magnets include sintered rare earth magnets, sintered ferrite magnets, hot-pressed/thermally deformed magnets, and bonded magnets. Radial magnets commonly used and discussed are basically sintered rare earth magnets, and radial ring-shaped sintered magnets can be divided into NdFeB and SmCo according to their materials. Sintered neodymium iron boron magnets are commonly used in motor rotors.

Application of radial ring magnets in motors

The rotor of a brushless DC motor is composed of permanent magnets with a certain number of pole pairs embedded on the surface of the iron core or embedded in the iron core. Permanent magnets are mostly made of rare earth permanent magnet materials with high coercivity and high permeability induction density, such as neodymium, iron, boron and so on. The role of the permanent magnets of the rotor is similar to the permanent magnets used in brushed motors. They all establish a sufficient magnetic field in the air gap of the motor. The difference is that the permanent magnets of the brushless DC motor are installed on the rotor, and the magnets of the brushed motor are installed on the stator.

At present, magnets with multi-pole magnetization on the outer or inner diameter are often used in servo motors, couplings, and spindle motors. Magnets with opposite outer and inner diameters are usually used in linear drives, high-end speakers, magnetic bearings, and compressors.

The advantages of radial magnets (magnetic rings) in motors

The assembly process of the motor assembly is much easier than the arc magnet is glued to the ring, and the assembly cost is much easier.

The uniformity of the magnetic flux is improved, thereby improving the efficiency of the motor. The assembly accuracy of the radial ring magnet will be much higher than that of the traditional multi-arc assembly, thereby improving the dynamic balance of the motor. Improve the utilization rate of raw materials.


Send Inquiry