Strong Electro Permanent Magnetic Chuck for Sale

Strong Electro Permanent Magnetic Chuck For Sale
Electric permanent magnetic chucks for sale are suitable for high precision grinding, milling and other precision machining, when this series electric permanent magnetic chucks for sale fixed workpiece, instantaneous power, can be firmly holding live Artifacts, without the power supply in the processing, processing is completed,  then instantaneous electricity source, so the electric permanent magnetic chucks for sale are not hot, the accuracy will not produce change, even a sudden power outage in the processing, the Strong Electromagnet
permanent magnetic chuck for sale will not excitation-loss, artifacts do not move, this series of electric permanent magnetic chucks, both" magnetic chuck" convenient maneuverability, and there was a "permanent magnetic chuck" safety and high precision surface grinding machine, machining centers, milling planer indispensable tool, the suction of up to 170N/cm2.

Description of electric permanent magnetic chuck for sale

1.Comprising 75mm*75mm poles with a force of 750 kgf for each pole.

2.It is possible to predetermine the force generated by counting the number of poles,work piece gripping at least 4 pole contact faces.

3.Controller do the Magnetizing or demagnetizing in 0.5~ 5 seconds..

4.Electric permanent magnetic chuck for sale is tested for Slippering force, Waterproof test, Temperature rise test, Electrical & Demagnetizing tests

Feature of electric permanent magnetic chucks for sale:

Specification of electric permanent magnetic chucks for milling:

75 Serices Strong Electromagnet Permanent Chuck

Note: This table shows the common specification, optional for any special specification.

Technical Characteristics Of Strong Electromagnet Permanent Chuck:

Note: Higher working temperature can be fixed according to requirements
Thickness can be fixed according to requirements

Controller (PLC)

Strong Electromagnet permanent chuck for sale:

Safety Of Strong Electromagnet Permanent Chuck:
Safety key switch: there are safety key switches set on the controller and remote controller, only by simultaneous working for safety key switches and pressing MEG and DEMEG buttons at the same time, the operation is effective, which can avoid wrong operation and equipment, staff and mould is safety.
Proximity sensors, inspect moving of mould at the first time, once mould disconnects 0.2mm, machine will be immediately stopped.
FCS sensor: After magnetic saturation is inspected normal, machine can be worked.
High performance permanent magnet (NdFeB + Alnico)constant magnetic
Magnetic predicted calculation: Magnetic is in proportion to the quality of pole connected an worked with mould rear panel, which can accurately predict suction between disk and mould.
Anti dropping sling: Install safety sling, when operation is made mistake and mould happens breakdown, it can prevent mould fall off and protect equipment and staff’s safety.
Permanent magnets ensure safety: Electric energy is needed only in the status of magnetization and demagnetization, after finish magnetization, suction of disk is provided permanent suction by interior suction of permanent magnets. When cutting off powder failure, the suction from disk to mould is still not changed.

Efficient Of Strong Electromagnet Permanent Chuck:

Change mould in 3 minutes

Operating Procedure Of Strong Electromagnet Permanent Chuck:

Strong Electromagnet Permanent Chuck How To Work

Magnetic Clamp force uniformity:

Application Of Strong Electro Permanent Magnetic Chuck For Sale