Injection Molded Magnetic Water Flow Rotor for Water Heater

Injection Molded Magnet;Injection Bonded Magnet;Water Flow Rotor;Water Heater Rotor;Rotor Flow;Waterflow

Description: 12x10x2mm Motor Magnet

Injection molded magnetic water flow rotor for water heater Description
The magnetic rotor is part of the water flow rotor assembly. The water flow rotor is a part of the water flow sensor.
The water flow sensor is made up of copper body, water flow rotor assembly, steady flow assembly and Hall assembly. The water flow sensor is installed in the water inlet of the water heater to measure the influent flow.
When the water flows through the flow rotor assembly, the magnetic rotor rotates and the speed varies linearly as the flow rate. Hall element output the corresponding pulse signal feedback to the controller, the controller to determine the size of the water flow, adjust the control than the valve current, so as to control the gas than the valve to avoid the use of gas water heaters in the course of the phenomenon of hot and cold.
When the magnetic rotor speed is greater than the starting speed, otherwise, the water heater to stop working.

Magnetic water flow rotor water heater rotor for water heater Specification
Size: 12x10x2mm

Other related water flow rotor product you may interested:
Please let us know your application so that we can recommend them for you.

Production process of magnetic water flow rotor water heater rotor for water heater

1. Material      Inspection

2. Mixing      Materials

3. Blending      Materials

4. Baking      Materials

5. Injection

6. Inspection      and Packaging