The front gear or belt has the problem of dust due to contact, and the use of non-contact rolling transmission parts solves the problem that no damage will be caused even if an abnormal load occurs. Our products will contribute to productivity improvement in a wide range of fields, from large machines to vacuum machines, electronics, chemistry, medicine, and food.
1. Dust-free environment
Using magnetic force, in a non-contact state, torque transmission can be used to convey products in a vacuum that requires a dust-free environment.
2. Low gas emission
In large models and even vacuum machines, in order to reduce gas, it can be used in an environment of 10-5Pa according to special surface treatment.
3. Subwoofer
It has a subwoofer effect that is unimaginable in conventional transmission equipment such as gears and conveyor belts. Can provide a clean and tidy production environment.
4. Torque limit function
If an abnormal load occurs, the two magnets will rotate independently to realize the torque limit function. In addition, because it is a non-contact environment, the service life of transmission tools such as conventional gears is longer than that of conventional gears.
5. Reduce costs
There is no need to replace parts due to wear and tear, which reduces operating costs. Since the performance is not affected at all even if the vacuum standby is repeated repeatedly, the conventional complicated and expensive design is not required.
6. Emphasize the design of magnetic circuit with super torque
According to the description of the product specification, the product with the "C" letter specification has added a weak magnetic component to the inner part of the magnetic ring, thereby enhancing the magnetic field outside the ring, and increasing the torque by more than 20% compared with similar products. Please check the product specification sheet for the difference in torque due to the presence or absence of strong magnetic components.
