Wet Automatic Cleaning Magnetic Separator

1. It can remove micron-level trace magnetic substances (including weak magnetic substances).
2. It can be automated without manual operation.
3. It can be carried out with multiple groups of magnetic rods, and the permanent magnetic high magnetic field can reach 15000GS.
4. Stable performance, energy saving, and high efficiency.
5. You can choose to filter in series/parallel mode with multiple cylinders for a better demagnetization effect.

6. It is mainly used for demagnetization and filtration of slurry-containing iron.

Iron Removal Process:

1. PLC adjusts parameters.
2. The inlet and outlet ports cooperate with the diaphragm pump to open other valves and close them.
3. The raw material (with magnetic material) passes through the filter chamber.
4. The raw material (without magnetic material) flowing out from the purification port can be filtered in multiple cylinders according to the material characteristics.
5. The signal feedback raw material inlet and outlet valves and slag valves are closed, and the air pressure is turned on to back-press the residual material to the temporary storage tank.
6. Close other pipes and extract the cylinder, and the cleaning port is operated to make the magnetic slag flow out from the slag discharge port.
7. Cycle (2, 3, 4, 5) (coordinate with the return port)