Home > Knowledge > Content
CGB Semi-Automatic Magnetic iron remover Product Manual
Apr 15, 2018

CGB Semi-Automatic Magnetic iron remover Product Manual

 

First, the scope of magnetic iron remover

CGB magnetic semi-automatic magnetic iron remover is widely used to remove iron powder, micro iron powder, magnetic substances, etc. in the powders of food, ceramics, chemical industry, mining, and electronics industries.

 

Second, magnetic iron separator product features

CGB magnetic bar type semi-automatic magnetic iron remover is mainly used for high-sensitive applications such as food, pharmaceutical, chemical, quartz sand and so on. The CGB magnetic bar type semi-automatic magnetic iron remover is mainly used to separate ferromagnetic impurities in materials that are easy to agglomerate or stick. The rotating magnet bar driven by the motor can prevent the material from being blocked, thus ensuring that the product can fully contact with the magnet during the flowing process. Its strong magnetic properties can eliminate flow, dryness, good flow ability, powdery, fine particles (particle diameter <6mm), large particles (particle diameter> 6mm), low magnetization stainless steel particles in flake-like materials. Two fans are installed above the magnetic iron remover to facilitate uniform feeding and prevent agglomeration.

 

Thirdly, magnetic iron remover installation

The space around the installation body must be one meter away, which is easy to operate.

Fourthly, the use of magnetic iron remover

A. Before use, check whether the fasteners are loose or not, and whether the iron room door is closed.

B. After starting the motor rotation, turn on two fans

C. See the demo animation for the iron removal operation layout.

 

Fifthly, magnetic iron remover notes:

1. The door of the iron removal room must be locked before starting the machine to avoid the raw material spilling out of the machine.

2. Do not open the body during operation to avoid unnecessary injuries.

 

Sixthly, magnetic iron remover maintenance

After the machine is shut down, the iron powder and raw materials on the iron removal room and magnetic bar group should be cleaned to avoid agglomeration of the iron removal room and the magnetic bar group.